GTSIL - T30 T40Part A: an odourless white liquid colloid.Part B: an aqueous liquid in transparent color.GTSIL - P30, 40Part A: a non-toxic and odorless liquid in translucent/skin color with plati
GTSIL - T30 T40
Part A: an odourless white liquid colloid.
Part B: an aqueous liquid in transparent color.
GTSIL - P30, 40
Part A: a non-toxic and odorless liquid in translucent/skin color with platinum indegrent.
Part B: a non-toxic and odorless liquid in translucent/skin color.
GTSIL - T30 T40
1. Good fluidity for pouring molding process.
2. Good tension for easy de-molding.
3. Good duplication with fine details.
4. High performance in replication.
5. Low shrinkage.
6. Long Shelf-life.
GTSIL - P30, 40
GTSIL - T30 T40, GTSIL - P30, P40 are very suitable model codes for making molds of small or medium sized concrete decorations, such as flowerpots, sculptures, artificial / cultural stones, blocks, etc.
With propreriate viscosity, you may use T 30, P30 to make molds in both pouring way and brushing way.
T 40 and P40 are suitable for medium or large sized moldmaking of concrete blocks, panels, which require for very very low shrinkage.
Thixotropic agent is available if requested.
| Model Code | GTSIL - T 30 | GTSIL - T 40 | GTSIL - P 30 | GTSIL - P 40 |
| Hardness - Shore A | 28-32 | 38-40 | 28-32 | 38-40 |
| Viscosity - Cps | 18000-23000 | 10000-14000 | 6000-9000 | 4000-6000 |
| Mixing Ratio - % | 3% | 3% | 1:1 | 1:1 |
| Tear Strength - KN/m2 | 25-30 | 16-20 | 20-23 | 12-16 |
| Tensile Strength - Mpa | 5-7 | 3.5-5.5 | 4-6 | 3.5-5.5 |
| Shrinkage - % | 0.3% | 0.3% | 0.1% | 0.1% |
| Elongation - % | 350-500% | 350-500% | 400-500% | 350-500% |
