Pourable Molding Silicone
Part A: an odourless white liquid colloid.Part B: an aqueous liquid in transparent color.
- Model： GTSIL-T 10, 15, 20, 25, 30, 40.
Part A: an odourless white liquid colloid.
Part B: an aqueous liquid in transparent color.
1. Good fluidity for pouring molding process.
2. Good tension for easy de-molding.
3. Good duplication with fine details.
4. High performance in replication.
5. Low shrinkage.
6. Long Shelf-life.
GTSIL-T 10, 15, 20, 25, 30, 40 are very suitable model codes for pouring working process of gypsum decoration products, candles, soaps, resin crafts, GRC/GRG decorations, artificial stones, climbing holds, etc.
Warm tips:
GTSIL-T 10, 15, 20, suitable for pouring work on small-sized products; TR-T20, TR-T30 suitable medium-sized products;
TR-T40, suitable for large-sized products.
Dear customer, if you are not sure which model code of silicone rubber is most suitable for your application, just feel free to contact us either by email or online service.
| Model Code | GTSIL-10 | GTSIL-15 | GTSIL-20 | GTSIL-25 | GTSIL-30 | GTSIL-40 |
| Hardness - Shore A | 8-10 | 13-16 | 18-22 | 23-26 | 28-32 | 38-40 |
| Viscosity - Cps | 10000-14000 | 12000-16000 | 14000-18000 | 16000-20000 | 18000-23000 | 10000-14000 |
| Mixing Ratio - % | 3% | 3% | 3% | 3% | 3% | 3% |
| Tear Strength - KN/M² | 10-15 | 15-18 | 19-23 | 23-27 | 25-28 | 16-20 |
| Tensile Strength - Mpa | 3.5-5.5 | 3.5-5.5 | 4-6 | 4-6 | 4-6 | 3.5-5.5 |
| Shrinkage - % | 0.3% | 0.3% | 0.3% | 0.3% | 0.3% | 0.3% |
| Elongation - % | 400-500% | 400-500% | 400-500% | 400-500% | 350-500% | 350-500% |