Tin Cure Silicone for Sculpture Molding
Part A: an odourless white liquid colloid.Part B: an aqueous liquid in transparent/yellowish color.
- Model： GTSIL - T 25, 30, 35, 40
Part A: an odourless white liquid colloid.
Part B: an aqueous liquid in transparent/yellowish color.
1. Appropriate viscosity for easy molding process.
2. Good tension for easy de-molding.
3. Good duplication with fine details.
4. High performance in replication.
5. Low shrinkage.
6. Long Shelf-life.
GTSIL-T 25, 30, 35, 40 are very suitable model codes for casting sculptures made of resin, gypsum, fiberglass, cement and some other concrete products with intricate patterns. With the thixotropic agent, you will even have a very pleasant molding time in your work!
Dear customer, if you are not sure which model code of silicone rubber is most suitable for your application, just feel free to contact us either by email or online service.
| Model Code | GTSIL - T 25 | GTSIL - T 30 | GTSIL - T 35 | GTSIL - T 40 |
| Hardness - Shore A | 24-26 | 28-32 | 34-36 | 38-40 |
| Viscosity - Cps | 16000-20000 | 26000-32000 | 33000-38000 | 10000-14000 |
| Mixing Ratio - % | 3% | 3% | 3% | 3% |
| Tear Strength - KN/m2 | 23-27 | 25-30 | 25-28 | 16-20 |
| Tensile Strength - Mpa | 4-6 | 5-7 | 5-7 | 5-7 |
| Shrinkage - % | 0.3% | 0.3% | 0.3% | 0.3% |
| Elongation - % | 400-500% | 350-500% | 350-500% | 350-500% |
Storage & Shelf Life
1Year at least, stored in a cool and dry place under room temperature 25℃