Part A: an odourless white liquid colloid.
Part B: an aqueous liquid in transparent/yellowish color.
1. Appropriate viscosity for easy brushing molding process.
2. Good tension for easy de-molding.
3. Good duplication with fine details.
4. High performance in replication.
5. Low shrinkage.
6. Long Shelf-life.
GTSIL-T 30, GTSIL-T 35 are very suitable model codes for brushing working process of resin crafts, artificial stones, GRC/GRG decorations, sculptures, and some other concrete products with intricate patterns. With the thixotropic agent, you will even have a very pleasant molding time in your work!
Dear customer, if you are not sure which model code of silicone rubber is most suitable for your application, just feel free to contact us either by email or online service.
Model Code | GTSIL-T30 | GTSIL - 35 |
Hardness - Shore A | 28-32 | 33-36 |
Viscosity - cps | 26000-32000 | 33000-38000 |
Mixing Ratio % | 100:3 | 100:3 |
Tear Strength - KN/M² | 25-30 | 23-28 |
Tensil Strength - Mpa | 5.0-7.0 | 5.0-7.0 |
Liner Shrinkage - % | 0.3% | 0.3% |
Elongation at Break - % | 350-500% | 350-500% |