Tin Cure Silicone for Casting Resin Crafts
Part A: an odourless white liquid colloid.Part B: an aqueous liquid in transparent/yellowish color.
- Model: GTSIL-T 10, 15, 20, 25, 30
Part A: an odourless white liquid colloid.Part B: an aqueous liquid in transparent/yellowish color.
Part A: an odourless white liquid colloid.
Part B: an aqueous liquid in transparent/yellowish color.
1. Properiate visicosity for either brushing or pouring molding process.
2. Good tension for easy de-molding.
3. Good duplication with fine details.
4. High performance in replication.
5. Low shrinkage.
6. Long Shelf-life.
GTSIL-T 10, 15, 20, 25, 30 are very suitable model codes for casting resin products, such as resin crafts, decorative parts, resin sculptures, resin jewelries, sculpture, resin ashtrays, etc.
Warm tips:
GTSIL-T 10, 15, 20, 25, 30, suitable for casting all sizes resin works. However, when being used for large sized molding work, better to get an outer mold to protect the silicone mold.
Dear customer, if you are not sure which model code of silicone rubber is most suitable for your application, just feel free to contact us either by email or online service.
Model Code | GTSIL - 10 | GTSIL - 15 | GTSIL - 20 | GTSIL - 25 | GTSIL - 30 |
Hardness - Shore A | 8-10 | 14-16 | 19-21 | 24-26 | 28-32 |
Viscosity - Cps | 10000-14000 | 12000-16000 | 14000-18000 | 16000-20000 | 26000-32000 |
Mixing Ratio - % | 3% | 3% | 3% | 3% | 3% |
Tear Strength - KN/ | 10-15 | 15-18 | 19-23 | 23-27 | 25-30 |
Tensile Strength - Mpa | 3.5-5.5 | 3.5-5.5 | 4-6 | 4-6 | 5-7 |
Shrinkage - % | 0.30% | 0.30% | 0.30% | 0.30% | 0.30% |
Elongation - % | 400-500% | 400-500% | 400-500% | 400-500% | 350-500% |